Synthesis and temperature control performance of TBAB/TBAHSO4 hydrate composite phase change material
-
Graphical Abstract
-
Abstract
The cold energy storage technology based on phase change material (PCM) has received a lot of attention for its ability to effectively reduce carbon emissions compared to traditional refrigerated transport methods. Hydrate composite phase change materials for cold chain transport were successfully prepared by using tetrabutylammonium bromide (TBAB) and tetrabutylammonium hydrogen sulphate (TBAHSO4) as phase change materials and the composite phase change materials for cold chain transport were successfully prepared by adding nucleant aluminium oxide (Al2O3) and thickener sodium carboxymethyl cellulose (CMC) to reduce supercooling and inhibit phase separation. The melting temperature of the composite phase change material TTAC-1.5 is 6.10 ℃, with an enthalpy of phase change of 169.23 J·g−1, and it shows almost no supercooling. The cyclic test results indicate that the phase change material has excellent cycle stability. Due to its suitable phase change temperature, high phase change latent heat and thermal reliability, the composite phase change material could be applied in cold chain transportation.
-
-